Thanks for your viewing ,if you are interested ,pls sent me inquiry ! ! !
P6 Indoor Full-Color video Advertising LED Display Board HD Screen:
Products Specification:
| Item | PH6 |
| Color | Full-color real pixels |
| Use environment | Indoor |
| Pixel pitch | 6mm |
| Module size | 192*192 |
| Physical density | 27777dots/square meter |
| Pixel configuration | 1R1G1B |
| LED chip | SMD3528 |
| Module resolution | 32*32 |
| Module power | 25w |
| Recommended viewing distance | ≥6 |
| Best viewing angle | H: 140°; V:140° |
| Maximum power consumption | 620w |
| Average power consumption | 25w |
| Cabinet size | W576m×H576mm |
| Standard cabinet resolution | 192*192 |
| Driving method | 1/16 Scan, Constant Current |
| Video frame rate | ≥60 Hz |
| Rate refresh | ≥1200Hz |
| White balance brightness | ≥1200cd |
| Operating temperature/Humidity | -30℃~+45℃ |
| Ingress protection | Back:IP43 |
| Input voltage | 110-220V AC±10% |
| Gray scale /Color | Display Colors ≥16.7N(Synchronize) |
| Brightness control | Manual/Automatic |
| Input signal | RF,S-VIDEO,RGBHV,YUV,YC & COMPOSITION,etc |
| Control system | PCTV+DVI video card+control card+fiber |
| MBTF | >500 hours |
| Life time | >100,000 Hours |
| The rate | <0.0002 |
what is the advantages of our P6 led display?
1. High quality:
our most basic guarantee: the aging time exceeding 24 hours. Malfunction dot rate less than 0.0001. MTBF more than 10000 hours.we assure high brightness and long lifespan.
2. Perfect Display Effect:
High brightness and clearly led display effect with easy use control system which allow you easy become enviable led display experts.
3. Attractive Factory Price:
We are a professional manufacturer, has its own factories and production lines. Without middlemen and trading companies, our price is more competitive, quality is more reliable. Our price is more competitive, quality is more reliable.
4. Auto equipment:
kailite has several auto production lines equipment with Taiwan auto-encapsulate machine, Taiwan Chang-Yu handler, and the production of LED meets the demand of high quality standard LED display.
why choose us?
1. High quality:100% tested before shipping, Best quality LED chip tube the CREE, SILAN, OPTO, EPISTAR assuring high brightness and long life span. industry-leading
2. Strong productivity:50000 pieces per month, Shorter delivery time
3. Good price:our price is 10% lower than the market because of the introduction of full
automatic production line with the characteristics of reducing the cost of labor and management.
4. Light weight:aluminum cabinet greatly saving fright cost and conveniently installing.
5. Stable performance:our most basic guarantee:the aging time exceeding 24 hours. Malfunction
dot rate less than 0.0001. MTBF more than 1000 hours.
6. Supporting different formats of images and videos:Flash, WAV/MIDI, Videos from TV and other equipments.
8. Any questions can be answerd quickly within 24 hrs.
9. ODM and OEM accept(best service)
10. Product variety
| Q: What is the brightness, viewing angle and wavelength of the LED? |
A: Luminous Intensity is equal to the amount of luminous flux emitted into a very small solid angle at a defined angular orientation from the light source. The measurement for luminous intensity is the candela. Symbol is Iv.
Viewing Angle is the total cone angle in degrees encompassing the central, high luminous intensity portion of the LED beam from the peak to the off point where the LED intensity is 50% of the on intensity. This off point is known as theta one-half ( 1/2). Two times 1/2 is the LEDs' full viewing angle; however, light is visible beyond the1/2 point.
Wavelength is the distance between two points of corresponding phase and is equal to waveform velocity divided by frequency. It defines what color human eyes could recognize |
| Q: What is dominant wavelength? Please specify the ranges of wavelength in red, green and blue color respectively. |
| A: Dominant wavelength is defined as the best range of wavelength showing the most natural color recognized by human eyes. Researches indicate that fixed colors with wavelength of 620-630nm (red), 520-530nm (green) and 460-470nm (blue), in fact mixed in a particular proportion, can get the pure white. That is, in display field, people use luminous materials with above wavelength to make "compounded" white more natural.In order to get a good balance white led display, we specify the led colors with wavelength within 4nm for each color |
| Q: Which chip vendors are you buying from? |
| A: It depends on the Customer's requirement. We can purchase from Japan, Korea, Europe, USA. We are using chips mainly from Taiwan |
| Q: What is the chip size you're using for outdoor display? How about indoor display? |
| A: For outdoor display, we're using 12mil chip for red, 14mil for both green and blue. Regarding indoor display, 9mil for red, 12mil for green and blue are currently adopted |
| Q: How much will the brightness of LED drop down after 1000hrs? |
| A: Based on the result of aging test, the brightness decay of green LED is around 5%-8%, while blue is around 10%-14% and red is around 5%-8% |
1.The price depends on the quantity. We can offer you the best competitive price at the market with the same even better quality
2. Your inquiry will be replied by well-trained and experienced staffs in 24 hours
3. Top Quality+Reasonable Price+Responsible After Service=Successful & Win
4. Help you design OEM&ODM or any your customized lightings and put into production
5. Distributorship are offered for your unique design and some our current models
6. Your sales area, ideas of design and all your private information will be well protected
We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
shenzhen factory indoor P3 led display,stage screen,DJ background board
Thanks for your viewing ,if you are interested ,pls sent me inquiry ! ! !
Product Tags:
|
|
6mm Pixel Pitch Indoor Full Color Led Display , Led Video Display Board 1R1G1B Images
|
